|
|
Brass: General Data |
|
Brass hollow round bar |
Minimum OD - 20.50 mm
Maximum OD - 110.00 mm |
|
Brass hollow hexagon bar |
Minimum AF - 20.50 mm
Maximum AF - 100.00 mm
Bore sizes 12.5 to 73.0 |
Bore (mm)
12.5
14 to 45
45 to 85 |
Minimum wall thickness (mm)
4.75
3.18
4.00 |
|
Angles, channels, T- sections special shapes |
Brass sections within a 152 mm diameter circumscribing circle, depending
on complexity or end use, can be produced.
Contact Copalcor’s sales department. |
|
For sizes beyond the above limits, please consult the Sales Department |
|
Mass calculating formula: |
|
Density of brass |
8.48 grams per cubic centimeter |
|
Round rod |
Diameter in mm x 0.0066523 = mass in kg/meter |
|
Square bar |
Width across flat in mm x 0.00848 = mass in kg/meter |
|
Hexagon rod |
Width across flat in mm x 0.007335 = mass in kg/meter |
Oxtagon
|
Width across flat in mm x 0.009567 = mass in kg/meter |
|
Rectangular bar |
Width in mm x thickness in mm x 0.00848 = mass in kg/meter |
|
Round tube |
2.663 x wall thickness in mm x (O.D. in mm minus wall thickness in mm) =
mass in kg/meter |
|
Irregular shapes |
Cross-sectional area in mm x 0.00848 = mass kg/meter. |
|
Alloy and size range for 70/30 Brass: |
|
Alloys |
The alloys done currently are 70/30 clean brass.
Other clean brass alloys can be done pending an order size such as 65/35. |
|
Foil |
12 mm to 300mm. wide x 0,11 mm to 0,4mm. thick.
• Strip in coil:
6mm to 600mm wide x 0, 45 mm to 2,0 mm. thick.
• Sheet:
600 mm wide max x 0.45mm to 2.0mm thick x 2000mm. max long.
• Circles:
A wide range is done. |
See pg 9 of
the Copalcor Product Catalogue |
|
